Al-Ko Chassis Cycle Carriers

AGITO TOP for panel vans

The AGITO Top bicycle carrier is as convenient as it is simple to use. Even with two bikes loaded onto the carrier it can be swiveled to allow access to the rear doors, no need to remove the bicycle or the carrier. With wide bicycle rails and the quick release ratchet system, the AGITO Top is perfectly suited to traditional bicycles or E-Bikes

At a glance

  • Load capacity: up to 80 kg
  • EC type approval available
  • Can be pivoted – even when loaded
  • With folding platform
  • Made from steel + aluminium
  • Can be removed without the need for tools

AGITO 120 and 150 – Swivels when loaded

The AGITO pivoting rear carrier systems can be swung open to give you full access to your rear doors at any time, even when it’s loaded with a bicycle, scooter or motorbike. As the lighter version of the two, the AGITO 120 has a 120kg carrying capacity which is typically enough for a motorised bike/ scooter or upto 4 bicycles.

AGITO 150 with a high load capacity of 150 kg

The bigger brother of the two, the AGITO 150 has a load capacity of 150kg, however like the smaller version it can swivel out allowing access to your rear doors for unloading. Both versions are suitable for most vans or motorhomes, but we always recommend checking with our office staff to confirm.

AGITO 120 Quick Specifications

  • Load capacity: up to 120 kg
  • EC type approval available
  • For 1 scooter or max. 4 bicycles
  • Can be pivoted – even when loaded
  • Fully aluminium
  • Can be removed without the need for tools

AGITO 150 Quick Specifications

  • Load capacity: up to 150 kg
  • EC type approval available
  • For 1 scooter
  • or for 1 scooter + 1 bicycle
  • Can be pivoted – even when loaded
  • Made from steel + aluminium
  • Can be removed without the need for tools

 

Futuro E-Lift – Bicycle carrier for panel vans with powered lowering platform

The Futuro E-Lift carrier can be raised or lowered by remote control, adding even more convenience to an already user friendly system. With 110cm of movement, bicycles or e-bikes are much easier to secure or unload. As with the AGITO systems, even when the carrier is loaded your rear doors can be opened allowing access quickly and easily.

When not in use, the carrier can be folded up to save on storage space or for when manoeuvring with little space.

At a glance

  • Load capacity: up to 60 kg
  • Empty weight without conversion kit approx. 60 kg
  • For max. 2 e-bikes or 3 bicycles
  • Can be pivoted – even when loaded
  •  Transport platform can be lowered by 110 cm via radio remote control
  • Folding and locking transport platform
  • Lockable swivel bracket
  • Suitable for roof type H2 and H3
  • No duplication of lighting required
  • Only for vehicles with wing doors and door hinges to 1800. Max. opening angle of the doors 900.

 

KAWA II features variable design for panel vans

     

The KAWA II aluminium platform rack has a variable platform design so that it can be customised to your needs. Be it a scooter, motorbike, bicycle or E-bike, it’s 150 kg load capacity (optional 200 kg) The KAWA II has you covered.

This carrier has plenty of little design features that make life easier, It’s enclosed platform protects your load from spray water, the retaining arms and tyre chocks all feature quick release mechanisms and the retaining strap can be removed to allow access to your rear doors.

Integrated ramp

For scooters, the KAWA II has the ramp integrated into the platform which couldn’t be more simple to use and store.

KAWA II specifications

  • Load capacity up to 150 kg (optional 200 kg)
  • Net weight approx. 43 kg
  • EC type approval available
  • For 1 scooter or max. 3 bicycles
  • With integrated ramp (scooter kit)
  • Variable platform design
  • Free access to rear doors
  • Removable retaining strap
  • Retaining arms and tyre chocks with ratchet quick release
  • Fully aluminium
  • Can be removed without the need for tools

Click on photos to enlarge